- Price Not Available
- Price Not Available
-
-
0.000.00
Summary
Change configuration| {{summaryItem.Description}}: | None |
|---|---|
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
Start PositionDownward pressure of the press clamps the part with the rocker’s bending lobes before the bending action starts. | |
BendThe rocker’s rotation forms the material around the anvil with less pressure and material distortion/marring than wipe tooling. |  |
Overbend by 3°The bending action continues to form the material around the anvil until desired angle is completed. The anvil should have 5° relief to allow for the 3° overbend. (The 3° overbend applies to cold rolled steel only.) |  |
Material SpringbackThe rocker bends past 90° to compensate for material springback, leaving a 90° bent part (± 1/2°). An internal spring returns the rocker position without scraping the material like wipe tooling. |  |
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
| Brand | Lamina |
|---|---|
| Bender Type | Posi-Bend High Production |
| Rocker Diameter | 0.625 in (15.88 mm) |
| Bender Length | 1.125 in (28.58 mm) |
| Saddle Width (E) | 2.125 in (53.98 mm) |
| Minimum Part Height | 0.25 in (6.35 mm) |
| Saddle Height (A) | 0.875 in (22.23 mm) |
| Front Saddle (B) | 0.750 in (19.05 mm) |
| Maximum Part Thickness | 0.042 in (1 mm) |
| Rocker Dimension (G) | 0.246 in (6.248 mm) |
| Saddle to Key (C) | 1.375 in (34.93 mm) |
| Weight (lbs) | 0.6000 |
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
Start PositionDownward pressure of the press clamps the part with the rocker’s bending lobes before the bending action starts. | |
BendThe rocker’s rotation forms the material around the anvil with less pressure and material distortion/marring than wipe tooling. | |
Overbend by 3°The bending action continues to form the material around the anvil until desired angle is completed. The anvil should have 5° relief to allow for the 3° overbend. (The 3° overbend applies to cold rolled steel only.) | |
Material SpringbackThe rocker bends past 90° to compensate for material springback, leaving a 90° bent part (± 1/2°). An internal spring returns the rocker position without scraping the material like wipe tooling. | |
Bendable Materials
- Hot Rolled Steel
- Cold Rolled Steel
- Dual Phase Steel (DP590, DP780, DP980)
- High Strength Low Alloy Steel
- Advanced High Strength Steel
- Ultra High Strength Steel
- Stainless Steel
- Galvanized Steel
- Aluminum
- Pre-painted Aluminum
- Brass
- Copper
- And Much More!
Custom Orders
- Requests for custom orders can be made by completing a Special Request Quote Form (included in this catalog), contacting Customer Service, or online.
- Shorter lengths or segmenting are possible.
- Pressure pads can be ordered with Posi-Bend™ units.
- Brand:
- Lamina
- Bender Type:
- Posi-Bend High Production
- Rocker Diameter:
- 0.625 in (15.88 mm)
- Bender Length:
- 1.125 in (28.58 mm)
- Saddle Width (E):
- 2.125 in (53.98 mm)
- Minimum Part Height:
- 0.25 in (6.35 mm)
- Saddle Height (A):
- 0.875 in (22.23 mm)
- Front Saddle (B):
- 0.750 in (19.05 mm)
- Maximum Part Thickness:
- 0.042 in (1 mm)
- Rocker Dimension (G):
- 0.246 in (6.248 mm)
- Saddle to Key (C):
- 1.375 in (34.93 mm)
- Weight (lbs):
- 0.6000
You might also be interested in the following products
Configure Product
- {{segmentOption.Description}}
-
{{segmentOption.Description}}
- {{segmentOption.Description}}
| {{summaryItem.Description}}: | None |
|---|---|
We’re the industry-leader in the production of manufacturing tools such as special punches, die components, die details, punch blanks and metal-stamping tools.
Get In Touch